Once you have the Lighting Key and the preliminary Magic Sheet(s) described in earlier posts, it is a fairly simple matter to populate the light plot with symbols representing the fixtures that you intend to use.  You do need to pay attention to the throw distances and make appropriate fixture choices accordingly.  You also have to do so within the available inventory.  There is no point choosing instrumentation that you do not have and cannot get.

上图是从早期职位的照明键。注意下面的灯光设计师如何使用它来 填充为8长轴灯（不包括吊 灯灯光效果）
To the upper right is the Lighting Key from an earlier post.  Note below how the Lighting Designer can use this to populate lights for the 8 major axis (not including the chandelier effect lighting)

Prima Donna plan showing lights from 8 axis

重现每个区域，如下图所示光情节很快便填充每个轴。
By reproducing each axis for each area the light plot quickly becomes populated as shown below.

注意该FOH臂架位置示出在平面位置填充的仪器形状，而是其附近的是每个位置的正视。它是正视携带所有的额外的信息（频道，颜色，仪器号，聚焦）以及标识夹具的类型的标志。这是因为，由于多个灯具中计划的上方和下方彼此驻留在这样的模糊彼此的位置处。的信道号的六边形内指示。颜色显示在与表示刚好超出色彩焦点夹具符号的前部。该仪器数量反映SL到SR灯具的位置上的每个水平位置是之间平行的前台。它从顶端（通过填充图的过程中途）编号对垂直位置底部（和舞台到关闭，如果垂直位置具有叠压边逐侧夹具。）通常在这一点上，该仪器将没有仪器的数字分配。然而，本实施例示出了已经到位的数字。您可能会注意到，他们不是连续的。在年表的空白将被填补，一旦所有的灯具都显示。
Notice that the FOH Boom positions are shown with filled-in instrument shapes in the plan position but that nearby is a front elevation of each position.  It is the front elevation that carries all of the extra information (Channel, Color, Instrument Number, Focus) as well as the symbol that identifies the type of fixture.  This is because, since multiple fixtures reside above and below each other in plan on such a position obscuring one another.  The channel number is indicated within the hexagon.  The color is  shown at the front of the fixture symbol with the focus indicated just beyond the color.  The instrument number reflects the fixture’s position from SL to SR on each horizontal position that is parallell to the proscenium. It is numbered from top to bottom  on vertical positions (and onstage to off if vertical positions have side-by-side stacked fixtures.)  Normally at this point, (partway through the process of populating the plot) the instruments will not have instrument numbers assigned. However, this example shows numbers already in place.  You may notice  that they are not sequential.  The  gaps in the chronology will be filled in once all of the fixtures are shown.

接下来，我们将增加吊灯灯光效果，在CYC照明和初步色键指示的特色
Next time we will add the chandelier effect lighting, the cyc lighting and the specials indicated on the preliminary color key.